PEL 230/12-2

Download data sheet

Characteristics

› Stabilised and adjustable output voltage

› DC OK signalling via LEDs

› Parallel connection option

› Service-friendly spring-loaded connector system

› Panel installation on mounting rails

› 3 years warranty

Technical Data

Product	Primary switched mode power supply, single-phase
Order number	PEL 230/12-2
Series	PEL 230

Rated input voltage	100 Vac to 240 Vac
Input voltage range	85 Vac to 264 Vac
Input voltage range	120 Vdc to 373 Vdc
Rated input current (rated load) (100Vac)	0.70 A
Rated input current (rated load) (230Vac)	0.40 A
Internal input fuse	2 AT
Rated frequency range AC	44 Hz to 66 Hz
Rated frequency range DC	0 Hz
Inrush current limitation NTC <	30 A
Recommended preliminary fuse	6A, 10A, 16A, B/C-Char.
Mains failure bridging (rated load) (100Vac)	10.0 ms
Mains failure bridging (rated load) (230Vac)	80.0 ms

Power	24 W
Rated output voltage	12 Vdc
Rated Output Current	2 A
Output voltage range	10.5 Vdc to 15.5 Vdc
Output Current Limitation (Constant Current) typ.	2.2 A
Ripple (rated load) typ.	100 mVss
Power factor	0.55
Max. power loss	6 W
Max. feedback resistance	25 Vdc
Verlustleistung Leerlauf (230Vac)	2.60 W
Verlustleistung Nennlast (230Vac)	6.00 W
Parallel connection possible	Yes
Series connection possible	Yes

Status display

Green LED

Conditions

Ambient temperature	-25 °C to 60 °C / -13 °F to 140 °F
Storage temperature	-25 °C to 85 °C / -13 °F to 185 °F
Humidity without condensation	5 % to 96 %
Cooling type	natural convection
Required minimum distance (side)	0 mm
Required minimum distance (top/bottom)	50 mm