Control- and isolating transformer
STSU 400/23
Characteristics
Benefits
› Control and isolating transformer according to EN (IEC) 61558-2-2 and EN (IEC) 61558-2-4
› Dual input voltage 230 and 400 Vac
› Very good switch-on behavior thanks to reduced inrush currents
› Primary side ±15 V taps for voltage adjustment
› Touch-protected terminal blocks according to UVV BGV A3
| Product | Control- and isolating transformer |
| Order number | STSU 400/23 |
| Series | STSU |
| Power | 400 VA |
| Input | 230 V / 400 V ± 15 V |
| Output | 2 x 115 V • 1.74 Aac |
| Phases | 1 |
| Frequency range | 50 Hz to 60 Hz |
| Short-Circuit Losses | 25 W |
| No-Load Losses | 13 W |
| Short-Term Power / instantaneous output | 1,440 VA |
| Short circuit voltage uk | 5.7 % |
| EN insulation class | B (130°C) |
| UL Insulation class | class 130 |
| Duty Cycle | 100 % |
| Wire material | Copper |
| Efficiency | 91.3 % |
General
| Short circuit proof | not short-circuit proof |
| Switching group | Iii0 |
| Shield winding | Yes |
| Cooling type | AN |
Environment
| Ambient temperature | -20 °C to 40 °C / -4 °F to 104 °F |
| Max. installation height | 2,000 m / 6,562 ft |
Protection and Safety
| Protection type | IP 00 |
| Protection class (prepared) | I |
| Overvoltage category | III |
| Degree of contamination | 1 |
Electrical Connections
| Input terminal | Screw terminal |
| Output terminal | Screw terminal |
| Terminal PE | Screw terminal |
Size and Weight
| Width | 120 mm / 4.72 in |
| Height | 123 mm / 4.84 in |
| Depth | 110 mm / 4.33 in |
| Weight | 5.3 kg / 11.68 lbs |
| Low Voltage Directive |
EN 61558-2-2 EN 61558-2-4 |
| Approval cURus - Recognized | UL 5085-1/-2; CSA 22.2 |
