Control- and safety isolating transformer
STEU 100/24
Characteristics
Benefits
› Dual input voltage 230 and 400 Vac
› Very good switch-on behaviour thanks to reduced starting currents
› High power density due to a compact construction design
› Primary side ±15 V tappings for voltage adjustment
› Very good corrosion protection and low noise thanks to BLOCK IMPEX vacuum impregnation
› Quick to cable up thanks to the use of spring-clamp terminals
› Contact protected screw connection terminals complying with UVV BGV A3
› Simple mounting thanks to robust metal footplate with oval slots
› With combination footplate for bolted and rail mounting
Product | Control- and safety isolating transformer |
Order number | STEU 100/24 |
Power | 100 VA |
Input | 230 V / 400 V ± 15 V |
Output | 2 x 12 V • 4.17 Aac |
Phases | 1 |
Frequency range | 50 Hz to 60 Hz |
Short-Circuit Losses | 9.52 W |
No-Load Losses | 5.24 W |
Short-Term Power / instantaneous output | 310 VA |
Short circuit voltage uk | 6.48 % |
EN insulation class | B (130°C) |
UL Insulation class | class 130 |
Duty Cycle | 100 % |
Wire material | Copper |
Efficiency | 87.1 % |
General
Short circuit proof | not short-circuit proof |
Switching group | Iii0 |
Cooling type | AN |
Environment
Ambient temperature | -20 °C to 40 °C / -4 °F to 104 °F |
Max. installation height | 2,000 m / 6,562 ft |
Protection and Safety
Protection type | IP 00 |
Protection class (prepared) | I |
Overvoltage category | III |
Degree of contamination | 1 |
Electrical Connections
Input terminal | Push-in terminal |
Output terminal | Push-in terminal |
Terminal PE | Flat plug connection |
Size and Weight
Width | 84 mm / 3.31 in |
Height | 98 mm / 3.86 in |
Depth | 112 mm / 4.41 in |
Weight | 2.1 kg / 4.63 lbs |
General
TS35 rail mounting possible | Ja |
Low Voltage Directive |
EN 61558-2-2 EN 61558-2-6 |
Approval cURus - Recognized | UL 5085-1/-2; CSA 22.2 |